Mazda 626 Station Wagon, Workshop Manual, Page: 392 / 577

DOOR, POWER WINDOW SYSTEM
10
Outer handle
11
Door key cylinder
12 Door key cylinder switch
13 Rod protector
14 Door weatherstrip
POWER WINDOW SYSTEM
FRONT POWER WINDOW REGULATOR
DISASSEMBLY/ASSEMBLY
Caution
• The automatic window return may not
operate properly if the frame of the
driver-side front power window regulator is
removed from the power window motor.
After performing any work, be sure to reset
the power window motor. (See S-12
DRIVER-SIDE POWER WINDOW MOTOR
RESETTING.)
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
1 Bolt
2 Power window motor
3 Frame
POWER WINDOW MOTOR INSPECTION
Driver’s Side
1. Remove the power window motor. (See S-11
FRONT POWER WINDOW REGULATOR
DISASSEMBLY/ASSEMBLY.)
2. Apply battery positive voltage to the power window
motor terminals A and G and inspect the operation
of the power window motor.
• If not as specified, replace the power window
motor.
Terminal
Motor operation
A
G
GND B + UP
B + GND DOWN
S-11