Mazda 6 2002, Workshop Manual

Page: 825 / 1248

S–66
WINDOW GLASS
4. If installing reused glass, install pins at the
ceramic void on the upper part of the windshield.
5. If installing reused glass, align the front
windshield molding marking and the center of the
upper section of the windshield, then install the
molding to the winshield.
6. Use only glass primer on the glass, and body
primer on the body and the molding. Allow it to
dry for
approximately 30 minutes .
Caution
•
Keep the area free of dirt and grease, and
do not touch the surface or the primer
may not properly bond to the surface of
the glass and body, which may cause leaks to occur.
7. Apply urethane to the area of the glass surface as
shown in the figure.
8. Set the the windshield in place and insert the pins
into the body. Install the windshield.
A6E7738W005
A6E7738W001
A6E7738W002