Mazda 6 2002, Workshop Manual

Page: 1031 / 1248

T–134
AIR BAG SYSTEM
3. Connect the SST (Adapter harness) to the
passenger-side air bag module as shown in the
figure.
4. Tie the passenger-side air bag module to the tire
with the module facing the center of the tire. Wrap
the wire harness through the tire and around the
bolts
at least four times .
Warning
•
If the air bag module ia not properly
installed to the tire, serious injury may
occur when the module is deployed,
When installing the air bag module to the
tire, make sure the module is facing the
center of the tire.
5. Stack the tire with the passenger-side air bag
module on top of two tires. Stack another tire that
has a wheel on top of the four tires.
6. Tie all tires together with wire.
7. Connect the SST (Deployment tool) to the SST
(Adapter harness).
8. Connect both SSTs (Deployment tool) to the
battery. Connect the power supply red clip to the
positive battery terminal, and the black clip to the
negative battery terminal.
9. Verify that the red lamp on both SSTs
(Deployment tool) is illuminated.
10. Make sure all persons are standing at least 6 m
{20 ft} away from the vehicle.
End Of Sie
A6E8130W015
A6E8130W036
A6E8130W037
A6E8130W034
49 H066 002
49 L066 002
49 G066 003
49 H066 002
BHJ0810W107