Mazda 6 2002, Workshop Manual

Page: 577 / 1248

N–8
ENGINE SPEED SENSING POWER STEERING
Steering Wheel Removal Note
Caution
•
Do not try to remove the steering wheel by hitting the shaft with a hammer. The column will
collapse.
1. Set the vehicle in the straight-ahead position.
2. Remove the steering wheel using a suitable puller.
Steering Lock Mounting Bolts Removal Note
1. Make a groove in the heads of the steering lock
mounting bolts using a chisel and a hammer.
2. Remove the bolts using a screwdriver.
3. Disassemble the steering lock component.
Steering Lock Mounting Bolts Installation Note
1. Assemble the steering lock component to the steering shaft.
2. Verify that the lock operates correctly.
3. Install new steering lock mounting bolts.
4. Tighten the bolts until the heads break off.
Steering Shaft Installation Note
Caution
•
Do not apply a shock in the axial direction of the shaft.
1. Lock the tilt lever.
2. Tighten bolt A.
3. Tighten nut B.
4. Tighten nut C.
Steering Wheel Installation Note
1. Set the wheels in the straight-ahead position, and install the steering wheel.
End Of Sie
A6E0612W018
A6E0612W020
A6E0612W103