Mazda 6 2002, Workshop Manual

Page: 388 / 1248

H–6
CLUTCH PEDAL
6. Hold the pedal when the gear noise stops (clutch pedal disengagement point).
7. Measure distance A (the distance from the clutch pedal disengagement point to the fully depressed position)
and the pedal stroke.
8. Verify that they are within specification.
•
If distance A or the pedal stroke is out of
specification, adjust the pedal height or the
clutch pedal free play to specification.
Clutch pedal disengagement stroke
Minimum: 20 mm {0.79 in} (Reference value)
Pedal stroke
140.0 mm {5.51 in} (Reference value)
End Of Sie
CLUTCH PEDAL REMOVAL/INSTALLATION
A6E491441030W02
1. Remove the battery and battery tray. (European (L.H.D.) and GCC specs.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. After installation, adjust the clutch pedal. (See
H–5 CLUTCH PEDAL ADJUSTMENT .)
.
A6E4914W003
A6E4914W004
1 Nut
2 Clutch switch connector
3 Clutch switch
4 Nut
5 E-clip
6 Pin
7 Bushing
8 Nut
9 Push rod
10 Clevis