Mazda 6 2002, Workshop Manual

Page: 773 / 1248

S–16
DOOR
End Of Sie
DOOR ADJUSTMENT
A6E771458010W03
1. Measure the gap and height between the front or rear door and the body.
2. If not as specified, loosen the front or rear door hinge installation bolts or the door lock striker installation
screws, and reposition the door.
Clearance
a: 2.5—4.5 mm {0.10—0.18 in}
b: -0.8—1.2 mm {-0.03—0.05 in}
c: -0.3—1.7 mm {-0.01—0.07 in}
d: -1.0—1.0 mm {-0.04—0.04 in}
e: -0.5—1.5 mm {-0.02—0.06 in}
3. Tighten the bolts or screws.
End Of Sie
FRONT DOOR GLASS REMOVAL/INSTALLATION
A6E771458510W01
1. Operate the front door glass so that the distance
from the top of the front door glass to the upper
part of the rear beltline molding is
210 mm
{8.3 in} .
2. Disconnect the negative battery cable.
3. Remove the front door trim.
4. Remove the hole cover.
A6E7714W025
A6E7714W022