Mazda 6 2002, Workshop Manual

Page: 394 / 1248

H–12
CLUTCH UNIT
Clutch Cover and Disc Removal Note
1. Install the SSTs.
2. Loosen each bolt one turn at a time in a
crisscross pattern until spring tension is released.
3. Remove the clutch cover and disc.
Flywheel Removal Note
1. Hold the flywheel using the SST.
2. Remove the bolts evenly and gradually in a
crisscross pattern.
3. Remove the flywheel.
Flywheel Installation Note
1. Install the flywheel to the crankshaft.
2. When reusing the bolts, clean threads and hole, then apply locking compound to the threads.
Note
•
No locking compound is needed when using new bolts.
3. Hand-tighten the flywheel lock bolts.
4. Install the
SST to the flywheel.
5. Gradually tighten the flywheel lock bolts in a
crisscross pattern.
Tightning torque
108—115 N·m {11.1—11.7 kgf·m, 79.7—84.8
ft·lbf}
A6E4920W002
A6E4920W003
A6E4920W004