Mazda 6 2002, Workshop Manual

Page: 790 / 1248

POWER DOOR LOCK SYSTEM
S–33
S
LIFTGATE LOCK ACTUATOR INSPECTION
A6E771862310W01
1. Disconnect the liftgate lock actuator connector.
2. Apply battery positive voltage to the liftgate lock
actuator terminals and inspect the operation of
the liftgate lock actuator.
•
If not as specified, replace the liftgate lock.
End Of Sie
DOOR LOCK TIMER UNIT REMOVAL/INSTALLATION
A6E771867830W01
1. Disconnect the negative battery cable.
2. Remove the glove compartment. (L.H.D.)
3. Remove the bolt.
4. While inclining the door lock timer unit along the
body panel in the direction indicated by the arrow,
disengage the bracket hook from the hole in the
body panel.
5. Disconnect the door lock timer unit connector.
6. Remove the door lock timer unit.
7. Remove the screw, then remove the bracket.
Note
•
The screw which fixes the door lock timer
unit and bracket is for a body ground
connection. Be sure to secure the screw
when installing.
8. Install in the reverse order of removal.
End Of Sie
Actuator operation
Connection
B+ GND
Lock A B
Unlock B A
A6E7718W016
A6E7718W004
A6E7718W020