Mazda 6 2002, Workshop Manual

Page: 456 / 1248

AUTOMATIC TRANSAXLE SHIFT MECHANISM
K–46–3
K
SELECTOR CABLE ADJUSTMENT
A6E561646102W02
1. Remove the center console.
2. Shift the selector lever to P position.
3. Unlock the lock piece of the selector cable
(selector lever side) in the order shown in the
figure.
4. Verify that the manual shaft is in P position.
5. Lock the lock piece of the selector cable (selector
lever side) in the order shown in the figure.
6. Install the center console.
7. Shift the selector lever from P position to L range,
and make sure that there are no other
components in that area to interfere with the lever.
End Of Sie
SELECTOR LEVER REMOVAL/INSTALLATION
A6E561646102W03
1. Disconnect the negative battery cable.
2. Remove battery and battery tray.
3. Remove the air cleaner compornent. (See
F–10 INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
4. Remove the console.
5. Remove the dashboard compleat.
(See S–82 DASHBOARD REMOVAL/INSTALLATION .)
6. Remove the SAS control module.
(See T–124 SAS UNIT REMOVAL/INSTALLATION .)
7. Remove the climate control unit. (See U–44 CLIMATE CONTROL UNIT REMOVAL .) (See U–45 CLIMATE
CONTROL UNIT INSTALLATION .)
8. Remove the rear heat duct. (See U–23 REAR HEAT DUCT REMOVAL/INSTALLATION .)
9. Remove in the order shown in the figure.
10. Remove the battery, battery tray and battery bracket.
End Of Sie
A6E5616W003
A6E5616W004