Mazda 6 2002, Workshop Manual

Page: 633 / 1248

DYNAMIC STABILITY CONTROL
P–37
P
Pressure retention
Note
•
To protect the DSC HU/CM, the solenoid valve used for simulations and the ABS motor stay on for 10
seconds each time they are switched on.
4. Send the command while attempting to rotate the wheel being inspected.
5. When pressure is being maintained, and a click sound indicating the solenoid is operating comes from the DSC
HU/CM, confirm that the wheel does not rotate.
•
Performing the inspections above determines the following.
— The DSC HU/CM brake lines are normal
— The DSC HU/CM hydraulic system is not significantly abnormal
— The DSC HU/CM wiring is normal
— Output system harness in DSC HU/CM (solenoid, relay) are normal
•
However, the following items cannot be checked.
— The DSC HU/CM input system harness and parts
— Extremely small leaks in the DSC HU/CM internal hydraulic system
— Unusual intermittent occurrences in the above items
End Of Sie
Command name
Wheels
Inhibition of understeer tendency
control
Inhibition of oversteer tendency
control
LF RF LR RR
LF_TC_VLV ON OFF ON
RF_TC_VLV OFF ON OFF
LF_DSC_V
OFF
RF_DSC_V
ABS_POWER ON
LF_INLET
OFF
OFF
OFF
ON
LF_OUTLET
OFF
LR_INLET ON
LR_OUTLET
OFF
RF_INLET ON
RF_OUTLET
OFF RR_INLET ON
RR_OUTLET OFF
PMP_MOTOR ON