Mazda 6 2002, Workshop Manual

Page: 859 / 1248

FLOOR COVERING
S–99
S
FRONT FLOOR COVERING REMOVAL/INSTALLATION
A6E774868670W01
1. Disconnect the negative battery cable.
2. Remove the front seats. (See
S–105 FRONT SEAT REMOVAL/INSTALLATION .)
3. Remove the rear seat.
4. Remove the front scuff plates.
5. Remove the rear scuff plates.
6. Remove the console.
7. Remove the front side trims.
8. Remove the B-pillar lower trims.
9. Remove the lower anchor of the front seat belt installation bolts.
10. Remove the tire house trim. (5HB)
11. Remove the fuel-filler lid opener bezel.
12. Remove the fasteners.
13. Remove the cap nuts.
14. Remove the clips.
15. Take the front floor covering off from the passenger-side door opening.
16. Install in the reverse order of removal.
End Of Sie
FLOOR COVERING
A6E7748W001