Mazda 6 2002, Workshop Manual

Page: 849 / 1248

TRIM
S–89
S
FRONT SCUFF PLATE REMOVAL/INSTALLATION
A6E774468710W01
1. Pull the front scuff plate upward, then disengage
clips B, pins C, D and hooks E from the body, and
remove the front scuff plate.
2. Install in the reverse order of removal.
End Of Sie
REAR SCUFF PLATE REMOVAL/INSTALLATION
A6E774468730W01
1. Pull the rear scuff plate upward, then disengage
clips A, pin B, and hooks C from the body, and
remove the rear scuff plate.
2. Install in the reverse order of removal.
End Of Sie
C-PILLAR TRIM REMOVAL/INSTALLATION
A6E774468240W01
4SD
1. Remove the tire house trim.
2. Turn the seaming welt over.
3. Remove the cap using a fastener remover, and
remove the bolt (with curtain air bag system).
4. Disengage clips A and clip B using a fastener
remover.
5. Pull the C-pillar trim forward, then disengage
hook C from the body, and remove the C-pillar
trim.
6. Install in the reverse order of removal.
5HB
1. Remove the tire house trim.
2. Remove the trunk side upper trim
3. Turn the seaming welt over.
4. Remove the cap using a fastener remover the
bolt. (with curtain air bag system)
5. Disengage clips A and pin B using a fastener
remover.
6. Pull the C-pillar trim forward, then disengage the
hook from the body.
7. Remove the rear center seat belt tongue from the
C-pillar trim. (LH only)
8. Remove the C-pillar trim.
9. Install in the reverse order of removal.
End Of Sie
A6E7744W017
A6E7744W018
A6E7744W019
A6E7744W020