Mazda 6 2002, Workshop Manual

Page: 567 / 1248

DRIVE SHAFT
M–25
M
Clip Disassembly Note
1. Mark the drive shaft and outer ring for proper
assembly.
Caution
•
Mark with paint; do not use a punch.
2. Remove the clip.
Balls, Inner Ring, Cage Disassembly Note
1. Mark the inner ring and cage.
Caution
•
Mark with paint; do not use a punch.
2. Remove the snap ring using snap-ring pliers.
3. Turn the cage
approximately 30 degree and pull
the cage and balls away from the inner ring.
1 Boot band (wheel side)
(See
M–20 Boot Band (Wheel Side) Disassembly
Note )
(See M–23 Boot Band (Wheel Side) Assembly
Note )
2 Boot band (transaxle side)
See
M–20 Boot Band (Transaxle Side) Disassembly
Note
See M–23 Boot Band (Transaxle Side) Assembly
Note
3 Clip
See
M–25 Clip Disassembly Note
See M–26 Outer Ring, Clip Assembly Note
4 Outer ring
(See
M–26 Outer Ring, Clip Assembly Note )
5 Snap ring
(See
M–26 Cage, Inner Ring, Balls, Snap Ring
Assembly Note )
6 Balls
(See
M–25 Balls, Inner Ring, Cage Disassembly
Note )
(See M–26 Cage, Inner Ring, Balls, Snap Ring
Assembly Note )
7 Inner Ring
(See
M–25 Balls, Inner Ring, Cage Disassembly
Note )
(See M–26 Cage, Inner Ring, Balls, Snap Ring
Assembly Note )
8 Cage
(See
M–25 Balls, Inner Ring, Cage Disassembly
Note )
(See M–26 Cage, Inner Ring, Balls, Snap Ring
Assembly Note )
9 Boot
(See
M–26 Boot Assembly Note )
10 Dynamic damper
(See
M–26 Dynamic Damper Assembly Note )
11 ABS sensor rotor
(See
M–21 ABS Sensor Rotor (With ABS)
Disassembly Note )
(See M–22 ABS Sensor Rotor (With ABS) Assembly
Note )
12 Shaft and ball joint component
A6E6316W010
A6E6316W015