Mazda 6 2002, Workshop Manual

Page: 916 / 1248

T–22
POWER SYSTEM
Socket Removal Note
1. Insert a tape-wrapped screwdriver into the socket
hole, then press against the ring protrusion to lift
the socket toward you.
2. As shown in the figure, lift out the socket until the
ring protrusion locks into the lower socket hole.
3. Remove the boot panel.
4. From behind the boot panel, slide a tape-wrapped
screwdriver in between the socket and the ring
protrusion..
5. While twisting the ring protrusion with the
screwdriver, push out and remove the socket.
Ring Removal Note
1. Pull the ring forward while compressing the
hooks.
End Of Sie
CIGARETTE LIGHTER INSPECTION
A6E811067000W02
1. Turn the ignition switch to ACC position.
2. Verify that the cigarette lighter comes out within
10—20 seconds , after pressing the plug into the socket.
•
If the cigarette lighter does not operate normally, replace the cigarette lighter plug and socket.
End Of Sie
A6E8110W104
A6E8110W106
A6E8110W201
A6E8110W105