Differential
ProMARK X
7-7
Stationary Differential
Press
DIF, 2,
and
ENTER
(or press
DIF
and the
DOWN ARROW
two times,
then
ENTER
). The receiver will compute
the optimal satellite set (based on PDOP),
then display the Direct Data To screen
with a receiver-generated filename.
Press
CLEAR
to key in your own 8-
character filename, or , if you are log-
ging to a PC or external logging device
with the LOG module, use the
RIGHT
ARROW
to toggle to the Data To Port
option.
If you select Data To Port, the output
dataport and baud rate selected in
SETUP 7 are shown.
DIRECT DATA TO:
1203P001.PSE
!
DIRECT DATA TO:
9600 BPS PORT 1
~!
NOTE
The dataport and baud rate must be selected in SETUP 7 first.
Note that files created in DIF2 will have a .PSE or .CAR extension and that
the unit generated filename consists of the date (1203), the letter “S”, and
a file sequence number (001) which will automatically increment by 1 each
time a new session is started. Press ENTER to make a selection.
Summary of Contents for GPS PROMARK X
