SETUP
ProMARK X
3-1
In this chapter the user will be introduced to the eighteen setup functions
which are accessed by pressing the SETUP key. These set up functions will
be covered in the numerical order in which they appear in the ProMARK X,
and are listed in the table below.
SETUP
NO.
PAGE
DESCRIPTION/FUNCTION
Initial Position
1
3-3
Used to set the initial position
during the initialization process.
Solve for Altitude
2
3-4
Allows the user to select the
operation mode of the receiver (2D,
3D, or AUTO).
Time and Date
3
3-4
Allows the user to set the time and
date during the initialization
process.
Mask Angle
4
3-5
Allows the user to set the angle
above the horizon, below which
the receiver will not look for
satellites.
Sampling Rate
5
3-6
Allows the user to set the rate at
which position and raw data is
stored in a file.
Timer
6
3-6
Allows the user to set a time and
duration for a selected function to
start and operate.
Dataports
7
3-7
Allows the user to turn dataport 1
or 2 on or off and to select the
function for each.
Coordinate System
8
3-8
Allows the user to select a coordi-
nate system or set up a user-
defined grid.
Map Datum
9
3-11
Allows the user to choose a
particular map datum.
Altitude Reference 10
3-12
Allows the user to select how the
unit calculates the altitude (MSL,
HAE, or HAG).
Chapter 3
SETUP
Summary of Contents for GPS PROMARK X
