Auxiliary Functions
ProMARK X
4-7
Data I/O interacts with either the COMM submodule or the LOG module to
the PPSW. Which module is used is determined by which type of data file you
transfer. You can also use AUX 5 to log data in real-time directly to a PC or
data logger.
First, connect the unit to a PC or data logger. Use SETUP 7 to set one of the
dataports to "COMM" and select a baud rate. You may also connect the unit
to an external power source at the same time.
AC Adapter
Power/
Data
Cable
Dataport 1,
9-Pin
Connector
to Computer
or Logger
5-Pin
Connector
8-Pin
Connector
5-Pin
Connector
K-Cable
(optional)
Dataport 2,
9-Pin
Connector
to Computer
or Logger
External Connections for the ProMARK X
The port on the side of the ProMARK X provides a connection for both
external power and for transferring data. The Power/Data Cable has two
receptacles on one end. One receptacle is for the 8-pin AC adapter. The
other receptacle is a 9-pin RS-232 connector, and is used to connect the unit
to the serial or comm port of a personal computer or data logger.
Access AUX 5. Press the
RIGHT AR-
ROW
to toggle between the SLAVE
and DOWNLOAD DATA options.
DATA I/O
ENTR TO CHOOSE
COMM
~!
NOTE
If you see the message "PORT NOT SET" when accessing this
function, press ENTER to override the Port Setup (Setup 7) and
reassign a port to this function. Keep in mind that the changes
you make here will be reflected in Setup 7.
Summary of Contents for GPS PROMARK X
