Magellan GPS PROMARK X, User Manual

Page: 95 / 188

Differential ProMARK X
7-3
Upon pressing ENTER , the receiver dis-
plays the descriptor screen. You can
enter any type of descriptive informa-
tion you wish regarding the file (for
example time, date, place, weather, etc.).
This can be helpful in keeping files sepa-
rate if many are collected in a short
period of time. Key in the descriptor up
to 72 characters and press
ENTER . You
may also press ENTER without entering
anything to have no descriptor.
The receiver now displays the Data Sam-
pling Rate screen. You can either accept
the data sampling rates displayed or key
in a new data sampling rate for both
POSition data and RAW data. To enter
a new data sampling rate, key in the
number desired followed by
ENTER .
Do this first for the POSITION data and
then for the RAW data. To change
POSITION only, key in the new number
and press
ENTER . Now re-enter the raw
data rate followed by ENTER . To accept
the displayed setting, simply press EN-
TER .
Upon pressing ENTER , the receiver dis-
plays the START AVERAGING screen.
To start averaging, press
ENTER .
DESCRIPTOR:
PRESS ENTER
DATA SAMPLE RATE
POSITION: 1 sec
RAW DATA: 1 sec
START AVERAGING
PRESS ENTER
Upon pressing ENTER , the receiver dis-
plays the AVERAGING screen. The num-
ber of fixes to be averaged will count off
in the lower left corner. The standard
deviation of horizontal position varia-
tion is also displayed in the lower right
(S=) and is updated as each fix is com-
puted.
AVERAGING 3D
WAIT
(0001) s= 00 m