Magellan GPS PROMARK X, User Manual

Page: 77 / 188

Waypoints, Routes & Navigation ProMARK X
5-7
SET RTE 2 LEG 1
st02 to _
!
You may choose POS as the starting point or destination of any leg. When
POS is chosen, it is stored as waypoint “stxx,” where “xx” is a number from
1 to 10 that corresponds to the route number. POS is no longer available,
and will not be displayed when defining another leg. Waypoint “stxx” is
available, however, to define another leg of the same route.
NOTE
The “stxx” waypoint from one route can not be used in another
route, and is not displayed when you scroll through waypoints
from ROUTE. If you want to reuse any “stxx,” copy it as
described in Renaming Waypoints .
Select a destination waypoint by
using the
RIGHT ARROW to scroll
through the stored waypoints, or
key in all or part of a waypoint
name followed by
ENTER .
Press ENTER . The unit automati-
cally moves to the next leg.
SET RTE 2 LEG 2
MESA TO _
!
When the desired position is dis-
played, press
ENTER .
SET RTE 2 LEG 1
st02 TO MESA
!
Repeat the steps above to enter
route legs until you have completed
your route, or until all 20 legs have
been set.
SET RTE 2 LEG 4
MARK TO HOME
!