Magellan GPS PROMARK X, User Manual

Page: 21 / 188

Getting Started
ProMARK X
2-7
Waypoint names are entered by pressing an alphanumeric key, then pressing
the RIGHT ARROW until the desired character is displayed. Press another
alphanumeric key to select the next character. When all of the desired
characters have been entered, press ENTER to save the name entered.
ON/OFF
The ON/OFF key turns the ProMARK X on and off.
Power-On. The ProMARK X performs a self-test each time it is turned on.
When the unit is turned on, it per-
forms a memory check.
VERIFYING
MEMORY
Next, the unit displays a "title
page."
The unit then displays a temporary
power status message, indicating
if the unit is operating from batter-
ies or an external power source.
.
BATTERY POWER
The unit then performs a brief self-
test of its memory, almanac, and
power. The "READY" display ap-
pears when the self-test is com-
plete. The READY screen will also
briefly (2 seconds) display the set-
tings for mask angle (MA10 is a
mask angle of 10
°
) and the dataport
(DP=N indicates that the dataport
is not on). (See SETUP 4 for Mask
Angle and AUX 5 Data I/O for more
details.)
Ö READY
PRESS POSition
3D 0m ALT
Copyright
Magellan
Corporation
1997