Differential
ProMARK X
7-10
INPUT NEW ATTR:
_
PRESS ENTER
If you wish to enter a new attribute not in
the active attribute file, you may do so at
any time. The attributes you create are
input into the data file. They are not,
however, stored in the active attribute
file. To do this, press
CLEAR
from any
Attribute display (displays with AT-
TRIBUTE: across the top of the screen).
You can also do this from the NO ATTR FILES AVAIL display if no attribute
files have been made active. The receiver displays the INPUT NEW
ATTRibute screen. Key in an attribute up to 72 (10 displayable at a time)
characters. Press
ENTER
. This attribute is now written to the data file and
the receiver returns you to the ATTRIBUTE display.
TO START LOGGING
PRESS ENTER OR
CLR TO CONT ATTR
The receiver immediately displays the
STOP LOGGING screen with a counter.
The receiver will locate and acquire the
selected satellites, then collect data to
the file specified or send it to the dataport
(depending on the option you selected).
The counter will begin after lock has
been acquired on the satellites and data
is being collected; this usually occurs in
about 10 seconds.
TO STOP LOGGING
PRESS ENTER
00:00 TOTAL
!
NOTE
You may enter as many attributes as you like, both before and
during data collection. All entered attributes will be written to
the head of the file.
Upon pressing
ENTER
to conclude attri-
bution, the receiver displays the START
LOGGING screen. Press
ENTER
again to
begin logging data.
Summary of Contents for GPS PROMARK X
