Magellan GPS PROMARK X, User Manual

Page: 108 / 188

Differential
ProMARK X
7-16
The Attribute screen is displayed show-
ing the DONE 00 option. If you don’t
want to assign attributes, press
ENTER
to return to the STOP LOGGING screen.
You can also use the right arrow to
toggle throughout the attributes which
are active (made active by the
ATTR key
function). In addition, you can enter
your own attribute by pressing
CLEAR .
Pressing CLEAR will display the INPUT
NEW ATTRibute screen. You can access
this screen by pressing
CLEAR any time
you are on a display which says AT-
TRIBUTE: across the top. Type in the
new attribute and press
ENTER . This
newly entered attribute is now written
into the data file, but is not entered into
the active attribute file. Pressing
ENTER
after keying in an attribute returns you
to the Attribute screen you were on
when your pressed
CLEAR .
To utilize an active attribute, you can
use the
RIGHT ARROW to toggle
through the active attributes to get to
the one that you want to use. You can
also use the
DOWN ARROW to scroll
through the characters in an attribute
name.
You can also key in the attribute num-
ber to go directly to the attribute you
want. This entry is also echoed on the
upper right of the display.
ATTRIBUTE:
WATER 04
PRESS ENTER ~!
ATTRIBUTE: 31
WATER 04
PRESS ENTER ~!
ATTRIBUTE:
DONE 00
PRESS ENTER !
INPUT NEW ATTR:
_
PRESS ENTER