Waypoints, Routes & Navigation
ProMARK X
5-2
A waypoint can also be named
automatically. Unit-generated
names are in the format Wxxx,
where xxx represents numbers 001
through 999. Waypoints are num-
bered in sequence. To name a
waypoint automatically, press
EN-
TER
without keying in any charac-
ters.
W003 32`26.67N
118`29.99W
3D 172m ALT
~
NOTE
Use waypoint names that are easy to remember, and keep a log
of waypoints that you have stored as a reference. This is espe-
cially important if you use unit-generated waypoint names.
Sample logbook pages are included at the back of this manual.
A position that is stored as a waypoint retains the date/time display and the
SQ/PDOP display. Press the DOWN ARROW at any time to view these
displays.
Entering Waypoints Manually.
Use the following key sequence to enter
a waypoint manually.
Press
WPT
, then
ENTER
. Key in a
one- to four- character waypoint
name from the alphanumeric key-
pad followed by
ENTER
, or press
ENTER
without making an entry to
name the waypoint automatically.
MESA ` . N
!
NOTE
Refer to
Entering Data
for instructions on entering text from the
alphanumeric keypad.
This message appears if the name
you chose is already being used.
Press
ENTER
and try again.
DUPLICATE NAME
PRESS ENTER
Summary of Contents for GPS PROMARK X
