Waypoints, Routes & Navigation
ProMARK X
5-6
To clear
all
waypoints, use AUX 7.
NOTE
Waypoints assigned to a route cannot be erased.
ROUTE
A route is a planned course of travel from one place to another. The ROUTE
key allows you to enter and store up to 10 routes, and to divide each route
into 1 to 20 legs. You can also view, add to, edit, reverse, and navigate on
a route.
Choosing a Leg Switching Mode
. The ProMARK X can automatically
switch from one leg to the next when navigating on a route, or it can wait
for the user to activate the next leg. Automatic or manual leg switching is
selected with SETUP, and is described in Chapter 3.
Creating a Route
. A route is created by using waypoints as the start and
destination of each leg. The route is therefore defined by a series of
waypoints, with the destination of one leg being the start of the next leg. A
route cannot be created unless you already have waypoints stored.
Press the
ROUTE
key. The current
leg of an existing route will appear.
A
RIGHT ARROW
will appear if
there is more than one leg in the
route.
Use the
DOWN ARROW
to scroll
to an unused route. If no routes are
available, display a route you do
not need anymore, and press
CLEAR
twice to erase it.
Press
ENTER
. The current position
(POS) is displayed. To select a dif-
ferent position, press the
RIGHT
ARROW
to scroll through the
stored waypoints, or key in all or
part of a waypoint name followed
by
ENTER
.
ROUTE 1 LEG 1
st01 TO MESA
085`M 15.33Km
~
SET RTE 2 LEG 1
PRESS ENTER
TO SET ROUTE 2
~
SET RTE 2 LEG 1
POS
!
Summary of Contents for GPS PROMARK X
