Differential
ProMARK X
7-8
The receiver will display a descriptor
screen. You may enter any type of
descriptive information you wish regard-
ing the file (for example, time, date,
place, weather, etc.). This can be help-
ful in keeping files separate if many are
collected in a short period of time. Key
in the descriptor up to 72 characters and
press
ENTER
. You may also press
EN-
TER
without entering anything to have
no descriptor.
If you prefer, you may use a waypoint
instead of a descriptor. Press the
DOWN
ARROW
to scroll through the stored
waypoints, or key in the desired filename
followed by
ENTER
. Press
ENTER
when
the desired waypoint is displayed to
return to the previous display, and
EN-
TER
again to continue.
Upon pressing
ENTER
, the receiver dis-
plays the Data Sampling Rate screen.
You can either accept the data sampling
rates displayed or key in a new sampling
rate for both Position data and Raw
data. To enter a new data sampling
rate, key in the number you want fol
lowed by
ENTER
. Do this first for POSition and then for RAW data. To
change POSITION only, key in the new number and press
ENTER
. Now
re-enter the RAW data rate followed by
ENTER
. To change RAW data
rate only, re-enter Position rate and press ENTER, then key in new Raw
data rate followed by
ENTER
. To accept the displayed sampling rates,
simply press
ENTER
. Note that you can also enter new sampling rates by
pressing
CLEAR
to clear the individual sampling rates, then keying in new
rates.
The receiver will now display the At-
tribute screen. If an attribute file has
been made active (refer to Attribute
chapter), you can use the
RIGHT AR-
ROW
to toggle through the active at-
tributes (up to 99).
DATA SAMPLE RATE
POSITION: 1 SEC
RAW DATA: 1 SEC
ATTRIBUTE:
DONE 00
PRESS ENTER !
W001 34`06.5895N
117`49.5899W
234m ALT
~!
DESCRIPTOR:
_
PRESS ENTER
!
Summary of Contents for GPS PROMARK X
