SETUP
ProMARK X
3-17
Once set, Battery Saver remains unchanged until reset in SETUP.
Access SETUP 16. Use the
RIGHT ARROW
to toggle between on and
off.
SETUP 17 — Beeper Control
. The unit beeps when any key on the keypad
is pressed, when a fix is updated, and when an SQ, PDOP, or Old Data symbol
appears. The beeper can be turned on and off; default is on.
Access SETUP 17. Press the
RIGHT ARROW
to toggle between on and
off.
SETUP 18— Display Control
. The Display Control function allows you to
change the display brightness (when the light is on) and contrast.
Access SETUP 18. Press the
RIGHT ARROW
to change the display
brightness.
The possible levels of brightness are 0 through 7. Each time the RIGHT
ARROW is pressed, the brightness increases to the next value; at 7, the value
rotates back to 0. (The default setting is 7.)
To change the display contrast, press
DOWN ARROW
from the bright-
ness display. Press the
RIGHT ARROW
to change the display contrast.
(It is not necessary for the light to be on to change contrast.)
The possible levels of contrast are odd numbers 0 through 5. Each time the
RIGHT ARROW is pressed, the contrast increases to the next value; at 5, the
value rotates back to 0. (The default setting is 5.)
SETUP 19 — Date Order.
All dates are displayed in month/day/year order.
SETUP 19 allows you to use day/month/year instead.
Access SETUP 19. Press the
RIGHT ARROW
to change the data order.
Summary of Contents for GPS PROMARK X
