Differential
ProMARK X
7-13
your own. Select the Data to Port
option if you wish to log the data to an
external device using the LOG software
module supplied on the PPSW disk.
Press
ENTER
to select one of the choices. In the following steps, we have
pressed
ENTER
to select the receiver generated filename.
The receiver now prompts you for a
descriptor. You may enter any type of
descriptive information you wish (for
example time, date, place weather, etc.).
This can be helpful in keeping files sepa-
rate if several are collected in a short
period of time. Key in a descriptor up to
72 characters and press
ENTER
. You
may also press
ENTER
without entering
anything to have no descriptor.
Upon pressing
ENTER
, the receiver dis-
plays the Data Sampling Rate screen.
You can either accept the data sampling
rates displayed or key in a new sampling
rate for both position data and raw
data. To enter a new data sampling
rate, key in the number you want fol-
lowed by
ENTER
. Do this first for POSI-
TION and then for RAW Data. To change
POSITION only, key in the new number
and press
ENTER
. Now re-enter the raw data rate followed by
ENTER
.
To change RAW data rate only, re-enter position rate and press
ENTER
,
then key in new raw data rate followed by
ENTER
. To accept the
displayed sampling rates, simply press
ENTER
. Note than you can also
enter new sampling rates by pressing
CLEAR
to clear the individual
sampling rates, then keying in new rates.
The receiver will now display the At-
tribute screen. If an attribute file has
been made active (refer to Attribute
chapter), you can use the
RIGHT AR-
ROW
to toggle through the active at-
tributes (up to 99).
DESCRIPTOR:
PRESS ENTER
DATA SAMPLE RATE
POSITION: 1 SEC
RAW DATA: 1 SEC
ATTRIBUTE:
DONE 00
PRESS ENTER !
Summary of Contents for GPS PROMARK X
