Troubleshooting & Operating Tips
ProMARK X
8-3
SQ warning:
The Signal Quality of one
or more satellites is very low. This
indicates that the signal is not strong
and the unit may lose it. SQ has little
effect on PDOP or accuracy; it is displayed
for information only. This symbol appears
on all screens of the affected position
fix.
Try this:
Change your position or the position
of the antenna. Even a slight change
may be enough to allow the receiver
to get a stronger signal.
Not enough satellites are visible to
take a position fix:
If operating in
2D, there are fewer than three satellites;
if operating in 3D, there are fewer than
four satellites.
Ñ
NOT ENOUGH
SATS UP
Try this:
1.
Make sure the antenna has a
clear view of the sky.
2.
If using an exterior antenna,
check the connections.
3.
Verify the initial position and
time (see SETUP).
4.
be sure enough satellites are
available at this time.
5.
If in 3D, try using 2D or switch
to AUTO. In AUTO the unit
takes 3D fixes when four
satellites are available and 2D
fixes when only three satellites
are available.
Summary of Contents for GPS PROMARK X
