Auxiliary Functions
ProMARK X
4-5
3D SAT SCHEDULE
SATS UP 9:30AM
DOWN 5:15PM
~
NOTE
The schedule computed will be based on the currently selected
mask angle and mode of operation.
You may see a shorter window of
availability, especially if you are oper-
ating near the poles. A
DOWN AR-
ROW
appears when there is more
than one window; press the
DOWN
ARROW
to view the next window.
AUX 3 — Satellite Status.
Satellite Status (“Sat Status” throughout this
guide) displays the elevation and azimuth of available satellites in relation to
the selected position.
Satellites are identified by a pseudorandom number (PRN), which is used by
the government to identify a specific satellite.
Access AUX 3. Use the
RIGHT AR-
ROW
to select POS or any waypoint, or
key in the name of the desired waypoint.
Press
ENTER
.
Next key in the desired date and press
ENTER
, followed by the time of day
and
ENTER.
Use the
RIGHT ARROW
to view the
status of each satellite. Elevation and
azimuth is displayed for satellites that
are above the horizon. SQ is displayed
as a numerick value when the satellite
has been tracked recently. (Signal qual-
ity is described in
Appendix 11.
)
Press
ENTER.
The unit displays a north-
up, overhead view of the available sat-
ellites. Each satellite's location is indi-
cated by its pseudorandom number
(PRN). Satellites that are being used in
the position solution are highlighted.
SAT STATUS FOR
POSITION: POS
~!
SAT STAT
!
2 2
2 4
2 3
0 5
2 6
1 7
0 6
1 6
SAT SQ EL AZM
03
OFF
!
Summary of Contents for GPS PROMARK X
