Waypoints, Routes & Navigation
ProMARK X
5-10
Appending a Leg
. You can also add legs to an existing route.
Scroll to the last leg of a route and
press
ENTER
. The destination
waypoint of the leg is erased.
SET RTE 10 LEG 9
BASE TO _
!
Use the
RIGHT ARROW
to scroll
through POS and the stored
waypoints.
SET RTE 10 LEG 9
BASE TO ROCK
!
When the waypoint you want to
use is displayed, press
ENTER
to
save the destination. The waypoint
is also saved as the start of the next
leg, which is displayed on the
screen.
SET RTE 10 LEG10
ROCK TO _
!
Continue, adding waypoints as described in
Creating a Route
, until you have
added all the legs you want, then press ENTER twice to save the changes you
have made.
Reversing a Route
. Reverse Route is an auxiliary function (AUX 8) that
allows you to reverse the waypoint order of any route. This means you can
navigate from one place to another, reverse the route, and navigate back to
your original starting point without manually entering a new route for the
return trip.
Reverse Route is described in more detail in the AUX 8 section of
Chapter 4.
NAVIGATION (NAV)
The NAV key provides information that relates your progress along a
courseline to the destination of the current leg. It also displays information
relating to your current rate and direction of travel.
Summary of Contents for GPS PROMARK X
