SETUP
ProMARK X
3-15
NOTE
Use leading zeros as required.
Press
ENTER
to save the value entered and to return to the original
display.
SETUP 13 — Choosing Distance/Speed Units.
Changing distance/speed
units affects all displays where distance or speed measurements are shown.
All stored distance values will be converted to the new unit of measure for
display.
Access SETUP 13. The currently selected unit of measure for distance and
speed is displayed. Use the
RIGHT ARROW
to scroll through kilometers
and kilometers per hour, statute miles and miles per hour, nautical miles
and knots, meters and meters per second, or feet and feet per second.
SETUP 14 — Choosing Automatic or Manual Leg Switching Modes.
Which route mode is selected here determines how the unit switches legs
when navigating on a route.
With both modes, the unit constantly updates the navigation screens to
reference your present position to the current leg's destination waypoint. It
also displays "CLOSE" (at the bottom of the screen) when you are within 500
feet (152.4 meters) of the destination waypoint.
In the automatic route mode, the unit switches from the current leg to the
next when you cross an imaginary line that runs through the destination
waypoint and is perpendicular to the courseline. All navigation information
is now referenced to the destination waypoint of the new leg.
Arrival Circle
Radius = 500 ft
(152.4m)
Waypoint 2
(Destination)
Perpendicular
to courseline
Waypoint 1
LEG 1
LEG 2
Summary of Contents for GPS PROMARK X
