Lucent Technologies CentreVu Report Designer, User Manual

Page: 203 / 266

Error Messages CentreVu Report Designer Version 8 User Guide
Phase 2 Historical Report Error Codes
16-5
Phase 2 Historical Report Error Codes
16
This section contains the
INFORMIX
*
error codes most likely to appear
for CentreVu CMS historical reports. Each code includes a description of
the error and the recommended corrective action.
These errors are reported in the following format:
INFORMIX error: <error number>
In addition, a circumflex (^) may appear in the listed Select statement(s)
to mark the location of an error.
If an error code appears that is not listed in this document, see the
INFORMIX SQL Relational Database Management System Reference
Guide for INFORMIX SQL.
*INFORMIX is a registered trademark of Informix Software, Inc.
Error Description/Solution
201 Description: A syntax error has occurred.
Solution: Check that you have not misspelled an RDSQL
statement, placed key words out of sequence, or included an
INFORMIX-SQL reserved word in your query.
202 Description: An illegal character has been found in the
statement.
Solution: Remove the illegal character (often a nonprintable
control character) and resubmit the statement
203 Description: An illegal integer has been found in the
statement.
Solution: Integers must be whole numbers from -
2,147483,647 to 2,147,483,647. Check that you have not
included a number with a fractional portion or a number outside
the acceptable range. Check also that you have not
inadvertently entered a letter in place of a number (for
example,
125p3
instead of
12503
).
204 Description: An illegal floating-point number has been found
in the statement.
Solution: Check that you have not inadvertently entered a
letter in place of a number (for example,
125p3
instead of
125.03
).
206 Description: The specified table name is not in the database.