Lucent Technologies CentreVu Report Designer User Manual Download

Page: 236 / 266

SQL Query and CMS Database Table Basics

CentreVu Report Designer Version 8 User Guide

Creating a Custom Data Table

18-14

To define a custom database table, complete the steps defined in the
following sections.

Step 1: Access
the

CentreVu

CMS Database in

INFORMIX

To perform these procedures, you must have purchased the

INFORMIX

SQL software.

To access the

INFORMIX SQL software, you need to log into the CMS

using

CentreVu Terminal.

To access the

CentreVu CMS database in INFORMIX, use the following

steps:

The

CentreVu CMS supports only the following INFORMIX

data types:

•

SQLSMFLOAT

•

SQLFLOAT

•

SQLMONEY

•

SQLDECIMAL

•

SQLSMINT

•

SQLINT

•

SQLSERIAL

•

SQLDATE

•

SQLCHAR

•

SQLNULL.

1a. Press the

SLK.

→

The Commands submenu
appears.

1b. Select the

UNIX

option.

→

All windows and menus
disappear, and the UNIX
prompt appears.

1c. At the

prompt, type the

following command:

DBPATH=/cms/db/inf.

Press the

key. Type

export DBPATH.

Press

the

key.

→

The UNIX prompt
reappears.

1d. At the

prompt, type the

following pathname:

/usr/informix/bin/is

ql.

Press the

key.

→

The INFORMIX logo
appears, followed by the
INFORMIX Main Menu.

Commands

Return

Summary of Contents for CentreVu Report Designer











































































































































































































































































Search results

Summary of Contents for CentreVu Report Designer

Reviews:

Related manuals for CentreVu Report Designer

Brands by name

Popular brands

Lucent Technologies CentreVu Report Designer, User Manual

Search results

Summary of Contents for CentreVu Report Designer

Reviews:

Related manuals for CentreVu Report Designer

Brands by name

Popular brands