LS SV-iG5H Series, Manual

Page: 88 / 226

Basic Functions
74
►
I6 - I10: Setting input range and corresponding frequency to 0 - +10V V1 input voltage
Ex) when minimum (+) input voltage is 2V with corresponding frequency 10Hz and Max
voltage is 8V with run freq.
Frequency setting via 0 - 10 [V] input or Terminal 7.1.4
Potentiometer
Group Code Parameter Name Setting Range Default Unit
Drive group
0.00 [Frequency Command] - 0 -400 0.00 Hz
Frq [Frequency Mode] 3 0 - 8 0
I/O group
I 6 [Filter time constant for V1 input] 10 0 - 9999 10
I 7 [V1 input Min voltage] - 0 - 10 0 V
I 8 [Frequency corresponding to I 7] - 0 - 400 0.00 Hz
I 9 [V1 input max voltage] - 0 - 10 10 V
I10 [Frequency corresponding to I 9] - 0 - 400 60.00 Hz
Select 3 in Frq code of Drive group.

0-10V can be directly applied from an external controller or a potentiometer connected

on terminals VR, V1 and CM.