LS SV-iG5H Series, Manual, Page: 107 / 226

93
Basic Functions
B
as
ic
Fu
nc
tio
ns
7.7 Frequency limit
Frequency limit using Max Frequency and Start 7.7.1
Frequency
Group Code Parameter Name Setting Range Default Unit
Function group 1
F21 [Max frequency] - 40 - 400 50.00 Hz
F23 [Start frequency] - 0.1 - 10 0.50 Hz
Max Frequency: Frequency highest limit. Any frequency cannot be set above [Max

frequency] except for F22 [Base frequency].
Start Frequency: Frequency lowest limit. If a frequency is set lower than this, 0.00 is

automatically set.
Frequency command limit using High/Low limit 7.7.2
Group Code Parameter Name Setting Range Default Unit
Function group 1
F24
[Frequency high/low
limit select]
1 0 - 1 0
F25
[Frequency high
limit]
- 0 - 400 50.00 Hz
F26 [Frequency low limit] - 0 - 400 0.50 Hz
Set F24 to 1.

Active run frequency can be set within the range of F25 and F26.

►
When frequency setting is done via Analog input (voltage or current input), the inverter
operates within the range of high and low limit frequency as shown below.
►
This setting is also valid when frequency setting is done via keypad.