LS SV-iG5H Series, Manual, Page: 37 / 226

23
Programming Keypad & Basic operation
B
a
s
ic
O
p
s
.
4.3 Moving to other groups
There are 5 different parameter groups in SV- iG5H series as shown below.

Drive group
Basic parameters necessary for the inverter to run. Parameters
such as Target frequency, Accel/Decel time settable.
Function group 1 Basic function parameters to adjust output frequency and voltage.
Function group 2
Advanced function parameters to set parameters for such as PID
Operation and second motor operation.
I/O (Input/Output)
group Parameters necessary to make up a sequence using Multi-
function input/output terminal.
Application group
Parameters to set advanced function for fan and pump such as
multi motor control and sleep boost, etc.