LS SV-iG5H Series, Manual, Page: 200 / 226

RS485 communication
186
Address Parameter Scale Unit Allotment for Bits
0x0333
H/W diagnosis
trip information
- -
Others : Reserved
B0 : HW-diag
0x0334 Warning -
Others : Reserved
B4 : FAN working B2 : Inverter overload
B0 : Overload
2.2) Inverter Control Area Parameters (Reading and Writing Available)
Address Parameter
Scal
e
Unit Allotment for Bits
0x0380
Frequency
command(Note1)
0.01 Hz Command frequency setting
0x0381
RPM
command(Note1)
1 rpm Command RPM setting
0x0382
Operating
command(Note2)
- -
Others : Reserved
B3 : Free run stop (0->1) B2 : Trip reset (0->1)
B1 : Reverse command (0), Forward command (1)
B0 : Stop command (0), Run command (1)
0x0383 Acceleration time 0.1 sec Acceleration time setting
0x0384 Deceleration time 0.1 sec Deceleration time setting
0x0388
PID
reference(Note3)
0.1 % PID reference command released
0x0389
PID feedback
value(Note4)
0.1 % PID feedback value
Note
1) Writing available, when frequency command is communication.
2) Writing available, when run command is communication mode.
3) Writing available, when PID Reference (H57 = 4) is communication mode.
4) Writing available, PID Feedback(H50 = 2) is communication mode.
2.3) Inverter Memory Control Area (Reading and Writing Available)
Address Parameter Scale Unit Allotment for Bits
0x03E2
Parameter
initialization
- -
0 : No
2 : Drv group
4 : Function group 2
* no setting during trip 1 : All group
3 : Function group 1
5 : Input/Output group
0x03E5
All history of
failure deleted
- - 0 : NO, 1 : YES