LS SV-iG5H Series, Manual, Page: 66 / 226

52
Function list
Function group 2
LED
display
Address
for
communi-
cation
Parameter
name
Min/
Max
range
Description
Factory
defaults
Adj.
during
run
Page
H70 A346
[Frequency
Reference for
Accel/Decel]
0 - 1
0 Based on Max freq (F21)
0 X 83
1 Based on Delta freq.
H71 A347
[Accel/Decel
time scale]
0 - 2
0 Settable unit: 0.01 second.
1 O 83 1 Settable unit: 0.1 second.
2 Settable unit: 1 second.
H72 A348
[Power on
display]
0 - 17
This parameter selects the parameter to
be displayed on the keypad when the
input power is first applied.
0 O 142
0 Frequency command
1 Accel time
2 Decel time
3 Drive mode
4 Frequency mode
5 Multi-Step frequency 1
6 Multi-Step frequency 2
7 Multi-Step frequency 3
8 Output current
9 Motor rpm
10 Inverter DC link voltage
11 User display select (H73)
12 Fault display
13 Direction of motor rotation select
14 Output current 2
15 Motor rpm 2
16 Inverter DC link voltage 2
17 User display select 2
H73 A349
[Monitoring
item select]
0 - 2
One of the following can be monitored via
vOL - [User display select].
0 O 142 0 Output voltage [V]
1 Output power [kW]
2 Torque [kgf

m]
H74 A34A
[Gain for Motor
rpm display]
1 -
1000
[%] This parameter is used to change the
motor rotating speed (r/min) to
mechanical speed (m/mi) and display it.
100 O 141
H75 A34B
[DB resistor
operating rate
limit select]
0 - 1
0 Unlimited
1 O
168
1 Use DB resistor for the H76 set time.
H76 A34C
[DB resistor
operating rate] 0 -
30[%]
Set the percent of DB resistor operating
rate to be activated during one sequence
of operation.
10 O