LS SV-iG5H Series, Manual, Page: 40 / 226

26
Programming Keypad & Basic operation
4.4 How to change the codes in a group
Code change in Drive group

1
In the 1
st
code in Drive group

“0.00”, press the Up (

) key
once.
2
The 2
nd
code in Drive group

“ACC” is displayed.
Press the Up (

) key once.

3
The 3
rd
code
“dEC” in Drive 
group is displayed.
Keep pressing the Up (

) key

until the last code appears.
4
The last code in Drive group

“drC” is displayed.
Press the Up (

) key again.

5
Return to the first code of Drive

group.

Use Down (

) key for the opposite order.
Code jump

When moving from the
“F 0” to the “F 15” directly
1 Press the Ent (

) key in
“F 0”. 
2
1 (the code number of F1) is

displayed. Use the Up (

) key
to set to 5.
3
“
0 5
” is displayed by pressing 
the Left (

) key once to move
the cursor to the left. The
numeral having a cursor is
displayed brighter. In this case,
0 is active.
Use the Up (

) key to set to 1.

4
1 5 is set.

Press the Ent (

) key once.

5
Moving to F 15 has been

complete.

Function group 2 and I/O group are settable with the same setting.