LS SV-iG5H Series, Manual, Page: 156 / 226

Monitoring
142
Inverter DC Link Voltage 9.1.3
Group Code Parameter Name Setting Range Default Unit
Drive group dCL [Inverter DC Link Voltage] -
Inverter DC link voltage can be monitored in dCL.

► 2
times the value of input voltage is displayed while motor is at a stop.
User display select 9.1.4
Group Code Parameter Name Setting Range Default Unit
Drive group vOL [User display select] -
Function
group 2
H73 [Monitoring item select] - 0 - 2 0
The selected item in H73- [Monitoring item select] can be monitored in vOL- [User

display select.
If output power or torque is selected, Por or tOr will be displayed.

►
H73: Select one of the desired item numbers.
H73 [Monitoring item select]
0 Output voltage [V]
1 Output power [kW]
2
Torque [kgf

m]
►
Enter motor efficiency indicated on motor nameplate to H36 to display correct torque.
Power on display 9.1.5
Group Code Parameter Name Setting Range Default Unit
Function
group 2
H72 [Power on display] - 0
Frequency
command (0.00)
0
`
- 1 Accel time (ACC)
- 2 Decel time (DEC)