LS SV-iG5H Series, Manual, Page: 44 / 226

30
Programming Keypad & Basic operation
Changing parameter value in Input/Output group

When changing the parameter value of F28 from 2 to 5
1 In F0, press the Ent (

) key once.

2
Check the present code number.

Increase the value to 8 by pressing the Up (

) key.

3 When 8 is set, press the Left (

) key once.

4
0 in 0 8 is active.

Increase the value to 2 by pressing the Up (

) key.

5
2 8 is displayed

Press the Ent (

) key once.

6
The parameter number F28 is displayed.

Press the Ent (

) key once to check the set value.

7
The preset value 2 is displayed.

Increase the value to 5 using UP key (

).

8 Press the Ent (

) key.

9
Code number will appear after 5 is blinking. Parameter

change is complete.
Press either Left (

) or Right (

) keys.

10 Moving to first code of Function group 1 is complete.


The above setting is also applied to change parameter values in function group 2 and I/O
group.