manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 503

IN CASE OF AN EMERGENCY

482

IF YOUR VEHICLE NEEDS TO BE

TOWED

If towing is necessary, we recommend you to have it done
by your Lexus dealer or a commercial tow truck service.
In consultation with them, have your vehicle towed using
either (a) or (b).

(a) Towing with a wheel lift type truck

(b) Using a flat bed truck

(c) Never tow with a sling type truck

Only when you cannot receive a towing service from a
Lexus dealer or commercial tow truck service, tow your
vehicle carefully in accordance with the instructions
given in ”(d) Emergency towing” on page 486.

Proper equipment will help ensure that your vehicle is not
damaged while being towed.  Commercial operators are
generally aware of the state/provincial and local laws
pertaining to towing.

Your vehicle can be damaged if it is towed incorrectly.
Although most operators know the correct procedure, it is
possible to make a mistake.  To avoid damage to your vehicle,
make sure the following precautions are observed.  If
necessary, show this page to the tow truck driver.

TOWING PRECAUTIONS:

Use a safety chain system for all towing, and abide by the
state/provincial and local laws.  The wheels and axle on the
ground must be in good condition.  If they are damaged, use
a towing dolly.

(a) Towing with a wheel lift type truck

From front

G40015

Use a towing dolly under the rear wheels.

NOTICE

Never tow a vehicle with an automatic transmission
from the front with rear wheels on the ground, as this
may cause serious damage to the transmission.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands