manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 292

AIR CONDITIONING

271

5. Pull the filter cover toward you.

G21020

6. Push the tabs and pull the filter case toward you.

G21021

7. Take out the filter.

G21022

8. Remove the filter from the filter case.

9. Inspect the filter on the surface.

If it is dirty, it should be replaced.

NOTICE

When setting the filter  to the filter case, the UP marks
shown on the filter and filter case should be noted and
fitted as shown.

INFORMATION

The air conditioning filter should be installed properly
in position.  The use of air conditioning with the filter
removed may cause deteriorated dustproof perfor-
mance and then affect air conditioning performance.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands