manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 393

STARTING AND DRIVING

372

CAUTION

When an obstacle is detected within about 25 cm (0.8 ft.)
from the vehicle, the dual sensors will change the
determination to an unavoidable collision.  To avoid an
accident or injury, be sure to confirm a safe distance
around your vehicle with your eyes and drive slowly.

(C) Collision will be avoided with the present steering
angle

G31057

 3 About 50 cm (1.5 ft.) to about 100 cm (3.0 ft.)

 4 About 37.5 cm (1.1 ft.) to about 50 cm (1.5 ft.)
 5 About 25 cm (0.8 ft.) to about 37.5 cm (1.1 ft.)

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands