manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 594

ELECTRICAL COMPONENTS

573

NOTICE

Make sure the engine and all accessories are turned
off before performing maintenance.

When checking the battery, remove the ground cable
first and reinstall it last.

Be careful not to cause a short circuit with tools.

Take care no solution gets into the battery when
washing it.

If the battery is disconnected or run down

The following functions may not operate correctly when you
reconnect or replace the battery.  In these cases, you should
normalize each system referring to the following pages.

Power windows (See page 59.)

Moon roof (See page 134.)

Variable gear ratio steering system (See page 424.)

Intuitive parking assist (See page 380.)

Checking battery condition

Checking by indicator

G64009

Check the battery condition by the indicator color.

 1

BLUE 

−

 Good condition.

 2

WHITE 

−

 Charging necessary.  Have the battery checked

by your Lexus dealer.

 3

RED 

−

 Have the battery checked by your Lexus dealer.

NOTICE

Do not refill the battery with water.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands