manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 369

STARTING AND DRIVING

348

G31046

To start the engine in this condition, push the engine
switch again while turning the steering wheel in either
direction as shown in the above illustration.

The steering wheel is unlocked, and the engine will start.

G31047

If the steering lock system is malfunctioning, the above
message appears.

At this time, the master warning light comes on and the engine
switch indicator light blinks amber.  The engine will not start.
In this case, contact your Lexus dealer.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands