manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 368

STARTING AND DRIVING

347

Steering lock

The steering wheel is locked in “OFF” mode.

When the steering lock is activated, you may hear a sound
coming from the steering column, it is not a malfunction.  If you
select the “OFF” mode while the driver’s door is open, the
steering wheel is not locked until the driver’s door is closed.

If you select the mode other than “OFF” or start the engine, the
steering lock is disabled.

If there is trouble somewhere in the steering lock system, either
of the following warning messages will appear on the
multi

−

information display.

S/T IS NOT UNLOCKED

CHECK S/T LOCK

G31045

When pushing the engine switch while the brake pedal is
depressed, the steering lock is not unlocked if load is
applied to the steering wheel, and the above message
appears.

The engine will not start.  At this time, the master warning light
comes on and the engine switch indicator light blinks green.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands