manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 304

AUDIO

283

If a Mark Levinson brand audio system is installed:

G22066

Automatic sound levelizer (ASL):
When the audio sound becomes difficult to be heard due to
road noise, wind noise, etc. during driving, touch the “ASL”
switch.  The system adjusts to the optimum volume and tone
quality according to the noise level.

When the system is on, the sound adjustment level is
displayed on the screen.

SURROUND:
If you touch “SURROUND”, surround sound will be enabled.

(d) Your radio antenna

The wire antenna is mounted inside the rear window.

NOTICE

When cleaning the inside of the rear window, be
careful not to scratch or damage the wire antenna.

Putting a window tint (especially, conductive or
metallic type) on the rear window may affect the
reception of radio or mobile telephone.  For the
installation of the window tint, consult with your
Lexus dealer.

(e) Your cassette player

When you insert a cassette, the exposed tape should be to the
right.

NOTICE

Do not oil any part of the cassette player, and do not
insert anything except a cassette tape into the slot.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands