manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 375

STARTING AND DRIVING

354

Correct use of the automatic transmission is explained in
the following parts.

(a) Normal driving

(b) Driving in “S” mode

(c) Using engine braking

(d) Backing up

(e) Parking

(f) Good driving practice

(g) If you cannot shift the selector lever

(a) Normal driving

G31022

 1 “P” (Park) position    2 “N” (Neutral) position

1. Start the engine as instructed in “Operating the engine
switch” on page 342.

The transmission must be in “P” or “N” position.  The engine will
not start in any drive position even if engine switch is pushed
while the brake pedal is depressed.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands