manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 499

IN CASE OF AN EMERGENCY

478

G40011

8. Remove the wheel nuts and remove the flat tire.

Lift the flat tire straight off and put it aside.

G40012

Before putting on the wheel, remove any corrosion on
the mounting surfaces with a wire brush or such.
Installation of wheels without good metal

−

to

−

metal

contact at the mounting surface can cause wheel nuts to
loosen and eventually cause a wheel to come off while
driving.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands